Recent content by gilpeel2002

First off, I am glad that Larry was not seriously hurt. There is something going on with that setup. Please consider my experience below. I have been using tubeless wheels and tires with Stan's sealant since 2009. I had one puncture on a century ride in that year that was witnessed by a rider...

Hi! I started with the Silvio 1.0 back in 2010. At that time there was no extension available. My bottom bracket was low like yours. In hind site I feel that the low bottom bracket made it easier to learn to ride. Later in 2010 Cruzbike came out with the extension. I got the 150mm one and it...

You are doing very well in a short time. How long are your crank arms? Your knees look like they are bent more than 90deg. Shorter crank arms will improve that. I am 6'-4" and I use 165mm cranks. There are others here who use even shorter ones. The wisdom of tall riders and longer crank arms...

11 speed fitting Silvio I cannot speak for any manufacturer but Campy. I now have Silvio 1.5. I also started with Silvio 1.0. The cassette for 11 speed Campy occupies the same space as 10 speed Campi. 10 speed Campi is about 1/32 inch wider than 10 speed Shimano. . I believe that 10 speed Sram...

Campy Hi Rod I have used Campy for 15 years. I prefer the 1 lever, 1 function principle. I had Shimano Ultegra before that and it was OK. I have not used sram so I cannot comment on that.

Campi 11 sp Group set I have been running 11 speed Super Record for 2 years and 5000 miles on my Silvio. No Problem!

Silvia due Looks great, I like the way the seat attaches. That is the key to the smaller box I'll bet. Keep up the great work. I think you are now achieving critical mass.

Test Silvio Please take a picture or two for us enthusiasts.

Drupal forum on unblocking In reading some forum posts at Drupal, it appears that this forum administrator should have the capability to unblock any blocked email (post) from a registered account. That being said, it sounded like navigating the service was quite complicated. Even my original...

New production run This would be an ideal time to make some extra front end parts for us people who have wanted to upgrade the Silvio 1.0 Regards,

On the road Hi Mick, In February 2011 I bought a new Silvio. I found myself to be quite wobbly around my house because it is flat or slightly down hill. When I got myself far enough away, after many short rides, I was 8 miles away with a slight up hill ride all of the way back. I found that...

NEW CURVED NOSE ON OLDER SILVIO I bought a Silvio 1.0 back in March of 2011. I have 1190 xseem and could never get that bike to strict that far without the back edge of the FD hinge rubbing the chain when approaching Big to big sprocket combinations. When I say the new Silvio 1.5 design I...

NEW CURVED NOSE ON OLDER SILVIO I bought a Silvio 1.0 back in March of 2011. I have 1190 xseem and could never get that bike to strict that far without the back edge of the FD hinge rubbing the chain when approaching Big to big sprocket combinations. When I say the new Silvio 1.5 design I...

This is a test