Robert Holler's latest activity

Yes - the rear is 100mm same as the Q and S

Attaching an aftermarket seat - like a hardshell - to the A4x and simply using a different stock diameter 31.2mm tube bent to a...

The air shock in mine failed over ten years ago. You can basically leave it (it wont move most likely) or you can lock it in the...

Almost 2 years ago, I was trying to decide between a S40 and a V20 and even traveled to Larry Oslund’s Cruzeum in Hilton Head to try...

If it is low mileage and in great shape it is a VERY GOOD first recumbent. One of the reasons I sill baby mine - it is one of my...

There might be some suspension forks around but I cannot guarantee it. That is a VERY early Silvio - it is likely nearing 20 years old -...

Let the fun begin! Whipped out my 3d Scanner (Einstar RockIt) - had to add a few reflective dots since the matte metallic paint wasn't...

Forgot to add. I have just over 5km riding it (~3.1miles). I'm sorta getting the hang of it I would say. Starting is now a non-issue...

Couple of updates today. First - the bike fits great on my Thule T2 XTR rack, as expected. Added a Coospo Ant+ & BT Cadence and...

NICE!!!!

Here are some pics of my experience trying to fit the Growtac caliper. As you can see it would not seat properly and the top interfered...

I can confirm with you that the Growtac does NOT fit. I was doing a rear fit attempt on the S40. Indeed our dropouts are not technically...

If there is a lot of rust I would replace the bolts - less for breakage but more that they will sieze up in the clamp.

Cat is out of the bag with your post - the Bimotal is the system I have been messing with. If you can figure out a mechanical caliper...

The s The stock setup chainline looks to be right around the 46mm mark. Robert