Robert Holler's latest activity

You could get a 2.25 or maybe (?) a 2.5 in there... but I am not sure what the point of that would be. Beyond the 47b range and it...

Well he is already 33 hours in riding at near 25mph average and over 318 miles.... that is next level already.

I.D. - 8mm O.D - 11.8mm Thickness - 1mm The washers are the same ones that are typically used for MTB shock mounting sleeve bolts, so...

Hey all - maybe most of you saw in the email - but if you did not, here is a good one to follow along with...

One of the main things I see above all else is the slack heatube angle will never allow for proper steering. We have spent well over a...

I dropped my chain a few times on my V20, usually when shifting into the smaller chainring coincided with going over bumps. When I...

I have mine on top of the boom as well. The key is to have a bottle holder that will keep the bottle in place otherwise it will pop off...

You fit looks pretty good! I agree with Robert about the handle bar adjustment - make small changes and try them out - whatever ends up...

Your fit looks pretty good IMHO - but you can move the slider back a hair to get your elbows a slight bit more inline with your torso. I...

You likely need more wheel time Drstimpy. 5-10 hours is a good start but not enough. Make sure you don't have any "death grip" going on...

Yes - the rear is 100mm same as the Q and S

Attaching an aftermarket seat - like a hardshell - to the A4x and simply using a different stock diameter 31.2mm tube bent to a...

The air shock in mine failed over ten years ago. You can basically leave it (it wont move most likely) or you can lock it in the...

Almost 2 years ago, I was trying to decide between a S40 and a V20 and even traveled to Larry Oslund’s Cruzeum in Hilton Head to try...

If it is low mileage and in great shape it is a VERY GOOD first recumbent. One of the reasons I sill baby mine - it is one of my...