Search results

Plan on being there next year. John, I had some friends from the office go down and ride it. It was their first year riding the 100 mile route. I plan on having my Vendetta there next year. Could not make this year since the components won't be in until tomorrow! Are you...

Good News Tuloose! Tuloose, Good News. My frame shipped so now I am really getting excited!

Eric, what is the status of your ride? Eric, What is the status of your ride? Also, do you think you would have been hurt worse if you had been riding a DF bike?

Waiting also I'm watching the clock for the business day to open in Taiwan to see if my Vendetta frame will ship this evening.

Should we use Anti-Seize Compound for BB install? Doug, Should I use ?Anti-Seize Compound to install the Shimano Ultraga BB into the Vendetta then? Thanks, Gary

What is the size of the tube behind the BB ring clamps? Need one more measurement. What is the diameter of the tube between the chainstays that is behind/below the BB ring clamps? For those of you that have mounted a light in this location, did you use standard handle bar mount here...

Thank You Eric, Thank you sir. I did forget to mention frame size. It is medium. Now I get to wait. Hopefully not as long as you did! Thanks again, Gary

I just pulled the trigger on a Vendetta Frame set. While I'm waiting, could somebody please provide a measurement for me? I putting a dynamo hub on it and I need to know the distance from the rear hub, up the seat stay, through the frame into the slider, down the boom and out the...

Loads faster. It was down today and when it came back, the pages were loading faster.

WOW!

All, I have a 44" to 45" X-Seam with a 32" in-seam and I am 5'10". Going by John's sizing guide, I am right in the middle of a medium Vendetta frame but I am just off the chart for a large frame. Other's here seem to have stepped up in frame size even though they fit the smaller one...

Disc brake wheel sets would be a nice option. BentBierz, I'm in the same boat. Both for wheels and running lights. I have my TRP HY/RD brakes on order this month along with an SP-Dynamo hub for the rear wheel. I'm planning on going with Velocity Wheels Deep Vee rims with reflective...

Speedplay Zeros. I have a set on my DF bike. I love them for a number of reasons. 1) Support for those of us with different leg lengths. They have spacers available to go between the cleat and the shoe bottom. 2) Adjustable float. I can set how much my foot floats around the peddle as I...

TRP HY/RD disc brakes. Ratz, Have you seen the TRP HY/RD disc brakes? ?http://www.trpbrakes.com/category.php?productid=1198&catid=206 They have the master cylinder at the brake instead on the the brifter. That way you use cables instead of hydrolic lines to the brake. Plus they work...

Cable tie mounts and magnic lights. Eric, I had come to that conclusion about routing cables from looking at your very informative pictures. Thanks for those. I found some .5 inch square cable tie mounts made of weather resentment nylon. I think these could be mounted on the...

Hole in bottom of boom. John, That is what I thought. If I were to go with a dynamo hub in the rear, is there a way to route the wire inside the frame? I've gone over the Eric's pictures in this thread and elsewhere on the site, but I can't determine if I could route a wire...

Hole in bottom of boom. John, What is the purpose of the hole in the bottom of boom? Thanks, Gary