Search results

I have a a source for vinyl that is reall close on the lettering. Finding some that can do a good the clear coat is a challenge

Custom like that has been done logistics aside. It is the 6-9 month lead time that makes it unattractive for the normal buyer

2L was too Long and the hose aren't optimal for the big. So that's going back Did some research didn't realize they had replace the Antidote line with the new Crux Line. Crux looks better for biking so trying those. The 1.5L should fit fine based on published full dimensions; and actually the...

Indeed the fun part is the surprise for a lot of people.

Being able to Mod was a design goal I heard mentioned at the show when it was on display. So hopefully some people will.

Technically that's not correct it's the area between that plates that wears; the pins get loose and the chain stretches if friction is high between the plates. The rollers on the other hand with traditional grease you want clean and not sticky so they don't drag dirt into your cassette. Squirt...

On that you know as much as I do; just contemplating ideas; and thinking your are correct

In other words ===== The kickr starter "trainer bundle" with coupons from Zwift and TrainerRoad...?

Incredibly cheap to sand blast the frame and re-powder coat; adds about $15 to the powder coating cost at least around here. The boom can't be done but the main frame and fork can.

Yeah I just left that our or I'd have to explain the headrest seat clamp that is no more :)

The beauty of 3m vinyl if I change my mind I can peal them off. was going to use put the correct color accents on and when for silly. A distance looks like a colored line. Thought about reflective but that's super expensive and removing it is impossible.

Progress continues; need to have a video con with Bart @ ventisit to finish the debug. A few more tease photos

For Disc Brakes on the V20/S30 you need reversed road standard so.... 100mm for the back wheel 135mm for the front wheel Fronts will all be 100mm that's pretty standard. For the rear.... 5/135 MM QR REAR Part. No.: HWGXXX0001528S Convert this product into 5 mm QR

I was gong to look this up but couldn't find it. Here are some of the highlights Gen 1 10 speed compatible 130 mm dropout V1.0 - pre hyrdo form; metal seat, Yellow V1.5 - pre hydro form; metal seat Yellow - improvements to rake and trail to help handling Gen 2 10 Speed compatible 130 mm...

Oh lord yes; you can read all about that on BROL; I spent 2.5 years riding a race trike on the 360 with good results; and test the schlumpf with them. in the end the mountain drive and speed drive worked the best with the n360; the schlump HSD was a bad match. Now there are several new models...

Working away.....busy month. Ok so Squirt and Heat wax are going to perform about the same watts wise. With Squirt you are re-lubing on the fly and picking up some dirt; that won't get flushed off the chain, there's not enough sacrifical lubricate on the chain to carry the dirt away and while...

Fill with redbull it gives you wings...

Email jacob@cruzbike.com about the problem and he can probably let you know if something is amiss with what you were sent. He designed the new one based on Jason's design. Normally this would got to support@ but in this one case it might be best to go to the source

I have both the 1.5L and the wide 3L coming for testing. Just because it hold 3L don't mean it has to be full.

For inside a truck there's the extra option of using the tougher mil spec stuff so that you can be less careful about picking up damage from other cargo. https://www.camelbak.com/en/military/gmi-packs/reservoirs