Search results for query: Rohloff

Indeed! Not *just* weight, but steering inertia resulting from weight times radius SQUARED.

Something to bear in mind is all the weight up front. A Rohloff might make more sense. With a belt of course ;)

I ran 1x on my S40 for a while. I'm now running 2x11. I have an old 14 speed Rohloff hub I used with a 44 chainring. I spun out at less than 30 mph, but I couldn't go to a bigger chainring without my cadence being too low on the hills I ride. Also, efficiency was poor (1.4mph slower up the same...

I second that. If you want extra suspension go with the new Silvio... you can fit bigger tires on 28mm+. The best idea is to keep the front light and easy to control. Just go with something easy and next year upgrade to the new hydraulic deurallier 1x13 speed drive chain from Rotor. As it's...

Cut the shaft in half and put a Rohloff or Pinion there, so the two halves rotate at different speeds.

Praying for a miracle. "Please, God, turn these gears into a Rohloff"

...to make a difference for me. My first configuration was with a Sugino 44-tooth track chainring. Chain line was about 54 mm (to match the Rohloff I used to have on the bike). The chain would derail several times on most rides (every 10 or 15 miles or so). Always at high cadence. The problem...

When I got a Grasshopper with a Rohloff I said I was never going back to Disraeli gears, but Rohloff does not fit my Silvio's forks. Luckily soon after I got the Silvio I discovered XX1, so at least I am saved from those horrible front rings. All else being equal, it is always nice to get more...

That's a pretty cool idea. It never occurred to me that it was possible to run wire that way.

Or improperly fitted mudguards?

If you do not like the noise, drown it out with a Rohloff.

...with the 650b x 42 drive wheel than with a 700c x 28 drive wheel (I swapped wheels between the S40 and the V20 to test the efficiency of the Rohloff hub). I think this is because the smaller higher-pressure 28 bounces off the road while the 42 maintains contact. Crank arm length: this seems...

...thumbs With the drivetrain pic. I'm using a Rolhoff internal geared hub 16t sprocket and Shimano Zee 39t crankset. https://www.rohloff.de/en/) https://bike.shimano.com/en-US/product/component/zee-m640.html So no derailleurs and to keep the chain free of dirt I have installed...

I like the Rohloff on my Grasshopper. The only thing I do not like about the Silvio is the Disraeli gears.

Finished building my new S40. The final pieces of the puzzle arrived yesterday: HED 650b rims laced to a SON dynohub and Rohloff hubs. With Compass 42mm tires. If you have some patience and a bit of persistence you can run the dynohub wiring through the seat support tube: The upper seat...

There have been photos of a 135mm Rohloff hub tried to fit, but there was at least 2 mm gap on one side of the fork! I cannot find the photo, as it was 2 or 3 years ago, and that is TOO many sleeps for an old timer like me to remember that thread it was in! Maybe one of the YOUNG wipper...

Trouble with Pinion or Efneo is that they put weight in the BB, which effects the handling of a Cruzbike. Rohloff is better. He rides a Grasshopper, does he?

...I do not regret it now. Gears are horrible devices for psychological torture, but the only alternative is single speed. I really like the Rohloff on my Grasshopper, but the Silvio forks will not take a Rohloff. Anyway, you are committed now, you bought the Park tool. That wet gravel path...

In the photo, what type of mount is that holding the computer on the boom? Where to get one?

What is clearance between front tire and fork crown?