Search results for query: chainstay length

The curved slider has a lot to do with the rider's height and the length of the chainstay. At 5'5" I use the short chianstay, and by the time I adjusted it to where I wanted it for my x-seam, the handlebar was too high for my liking. It even obstructed my view. Using the medium chainstay...

That is a good point, as after adjusting the boom length, I forgot to tighten the chainstay clamps, and the front derailleur changing went to pot!!!! When I stopped at the bottom of a long hill, and went to manually move the chain onto the Granny sprocket (EVERONE should have one!!!!), that the...

As I wrote, Jack, such a low BB was what I wanted to avoid and figured correctly that I would need the 21 inch chain stay assembly to replicate the geometry I wanted. As it turned out, what I wanted was incorrect- a lower BB actually is better for me. For one thing, it somehow mitigated my...

...I've seen in pics appear to have the slider almost parallel with the ground. I'm perplexed that the availability of 3 different chainstay lengths seems to be a CB corporate open secret! CB HQ, if you're listening, please make the various chainstays available on the CB retail website. Thanks...

I have a 46+ inch x-seam and have been loving a Silvio 2.0 with 100 mm cc extension (avatar shows bike with previous 150mm ext.) and have just recently been dealing with this whole CB fitting issue as in the past 3 weeks have accomplished 3 complete frame-builds. I stripped the S2.0 of all...

5'6.75", 168 lbs and in the green zone on Ken's chart. Is the green zone intended to imply that a buyer can expect the Cruzbike to fit "out of the box", without additional cost mods? Or does the green zone indicate that with sufficient effort and, perhaps, additional expense one can expect to...

Got'cha Benphyr, thanks for the clarification. I guess that should have been obvious, sorry for the confusion. As younger folks like to post on web forums like this, "+1". With any luck there's a photo of the headset area of my partially disassembled S40 attached in my reply. In my case I could...

I used a fork stem extender on my V20 for this exact problem. It has worked very well. I didn't need the full length of the extender, so it was cut off. Much easier experimenting with a $12 extender!

I just swapped the stock medium chainstay for a short on my S40 and the improvement in fit is dramatic. Last time I checked I was at about the 40'th percentile height for U.S. adult humans, but apparently the S40's one-size-fits-some frame was targeting a much taller subgroup of the population...

...for a given leg length and as @velocio mentioned also lowers the bars but these are side effects once you've decided to change the chainstay length. So why change them? Obviously there's a design center that Cruzbike was targeting in terms of rider height, leg length, etc., and I'm sure the...

I didn't see this mentioned previously in this thread, but if it was and I missed it my apologies... Another thing to note about using a longer chainstay is that the BB will need to rotate upwards to accommodate the same leg length. Due to the well known teeter-tooter effect (well known to 2'nd...

I added two S/S washers to my preowned S30, with Velcro as the major joining method! I will add two rubber washers, as the nylon washers I have are too thick! THANKS for the info!!!!

Hey Cruzfolk, I have an S40 that I bought "used", which is to say the first owner assembled it and rolled it around a parking lot enough to know it wasn't for him. It was claimed to be a "custom build", which I now realize means the first owner assembled it himself from parts he collected. I...

Are there objective standards for choosing different lengths? For example, certain inseam should equate to certain chainstay length, or is it more subjective, for example comfort and riding style?

Does anyone know what the 19.5" and 21" measurements refer to? Is it the distance from center of BB shell to center of dropout? BTW, that same measurement on my S40 is about 7". I don't see different length chainstays, or any chainstays, listed for sale on the Cruzbike website. Are they also...

Extensions were available in 100mm and 150mm lengths. I happen to have a custom 60mm and a 100mm in my parts box. Used the 100mm on my S1.o and the 60mm on my dual-suspension S30. I may also have a 30mm in the parts box too. I know, its a long story..... DocS send me a PM with contact # and...

First one is a v1. Aluminium pan seat. Original vendetta. Red one is first v20 and a better handling finish and design more adjustable machine. You size the chainstay to fit your leg length . All hydroformed mainframes are same size. Great bike. Good for sealed audax.

I have bought the new chainstay extender and installed it. I haven't adjusted the shift cable yet as I'm still waiting for my leg to heal. It's been a long 6 months without riding. I have managed to move to a spin class at my local "Y" so maybe in another month I'll be cleared for riding. I'm...

What did you use to carry your typical audax/brevet gear? Thanks!

...as fast lol. Gradient climbing in the wet at the extremes can also require refined smooth pedaling to not lose grip. Your choice of chainstay length will be critical in relationship to your personal physiology. Be guided by Robert Holler on bike fit. In every other area from real customer...