rfneep
Well-Known Member
Bike has been SOLD!
Hi All,
For sale is a 2018 model S40, one of the last of the 1st generation S40. I bought it as a frame kit from Rose City Recumbent Cycles and built it to my specifications. It has been ridden only intermittently and has maybe at most 500 mies on it total. Overall the bike is in excellent shape with only the usual nicks from use and storage.
The build:
Frameset: S40 slate gray with blue accents
Fork: Gen 1 with tapered legs. Narrower top but higher crown clearance compared to present generation.
Wheels: SRAM Roam 50 650b (27.5in); 25 mm outside, 21 mm inside; tubeless compatible (claimed weight 1530 gm for wheelset)
Drive Wheel hub: SRAM XD
Tires: 650B x 42 Rene Herse (Compass) Babyshoe Pass TC (tubeless compatible)
Tubes: Schwalbe, presta valves
Drivetrain: SRAM Rival 1x11 speed
Derailleur: SRAM Rival 1 Type 3 Long-cage
Cassette: SRAM XG-1195, with added Wolf Tooth GCX 46t large cog (blue); XD compatible; 10-46t range
Chain: SRAM PC-1170
Chainring: SRAM 40t narrow-wide
Crankset: Andel triple, shortened to 152 mm by Mike Stonich at Bikesmith Design
Bottom Bracket: Shimano UN55
Shifter: SRAM TT500 bar end, 11-speed (right side)
Brake levers: Tektro RL340 Road Bike Short Pull Levers
Brakes F&R: TRP Spyre SLC (carbon), 160 mm TRP rotors
Brake cable housing: Jagwire Pro Brake Housing kevlar compressionless
Handlebar: Salsa Woodchipper 44 cm
Seat: standard Cruzbike carbon seat with front seat extension
Headrest: standard Cruzbike cushion
Pedals: not included
Extras (if desired):
Left shifter for FD: SRAM TT500 bar end, 2-speed (left side)
FD: SRAM Rival 2x10 Road Front Derailleur
Handlebar: standard Cruzbike S40 handleba
Handlebar tape: Lizard Skins (blue)
Spare derailleur holder
Front derailleur cable pulley
Original 42t cog for SRAM XG-1195 cassette (to convert to original)
Option:
Seat Cushion: replace Cruzebike cushion with Ventisit (originally bought for an S30 but fits OK on S40)
The handlebar tape is due for a refresh. I am including new tape for that but did not install so owner has the option of which handlebar to use.
Price $2,650, plus shipping if needed. Located in Madison, WI. Willing to drive a bit to meet a near-local buyer.
Thanks for looking!
Ray
Hi All,
For sale is a 2018 model S40, one of the last of the 1st generation S40. I bought it as a frame kit from Rose City Recumbent Cycles and built it to my specifications. It has been ridden only intermittently and has maybe at most 500 mies on it total. Overall the bike is in excellent shape with only the usual nicks from use and storage.
The build:
Frameset: S40 slate gray with blue accents
Fork: Gen 1 with tapered legs. Narrower top but higher crown clearance compared to present generation.
Wheels: SRAM Roam 50 650b (27.5in); 25 mm outside, 21 mm inside; tubeless compatible (claimed weight 1530 gm for wheelset)
Drive Wheel hub: SRAM XD
Tires: 650B x 42 Rene Herse (Compass) Babyshoe Pass TC (tubeless compatible)
Tubes: Schwalbe, presta valves
Drivetrain: SRAM Rival 1x11 speed
Derailleur: SRAM Rival 1 Type 3 Long-cage
Cassette: SRAM XG-1195, with added Wolf Tooth GCX 46t large cog (blue); XD compatible; 10-46t range
Chain: SRAM PC-1170
Chainring: SRAM 40t narrow-wide
Crankset: Andel triple, shortened to 152 mm by Mike Stonich at Bikesmith Design
Bottom Bracket: Shimano UN55
Shifter: SRAM TT500 bar end, 11-speed (right side)
Brake levers: Tektro RL340 Road Bike Short Pull Levers
Brakes F&R: TRP Spyre SLC (carbon), 160 mm TRP rotors
Brake cable housing: Jagwire Pro Brake Housing kevlar compressionless
Handlebar: Salsa Woodchipper 44 cm
Seat: standard Cruzbike carbon seat with front seat extension
Headrest: standard Cruzbike cushion
Pedals: not included
Extras (if desired):
Left shifter for FD: SRAM TT500 bar end, 2-speed (left side)
FD: SRAM Rival 2x10 Road Front Derailleur
Handlebar: standard Cruzbike S40 handleba
Handlebar tape: Lizard Skins (blue)
Spare derailleur holder
Front derailleur cable pulley
Original 42t cog for SRAM XG-1195 cassette (to convert to original)
Option:
Seat Cushion: replace Cruzebike cushion with Ventisit (originally bought for an S30 but fits OK on S40)
The handlebar tape is due for a refresh. I am including new tape for that but did not install so owner has the option of which handlebar to use.
Price $2,650, plus shipping if needed. Located in Madison, WI. Willing to drive a bit to meet a near-local buyer.
Thanks for looking!
Ray
Last edited:
