Search results

Conversion Kit with extras for sale. Excellent condition. Kit is complete per Cruzbike parts list and includes additional hollow rear axel (for the repositioned non-drive wheel) and a custom made, heavy duty seat post. $260 OBO plus shipping. (new price) D. Finan dkfinan@yahoo.com

Another GF Joushua convert http://cruzbike.com/finished-my-conversion-thanks-doug-b-and-john-t

Post Info kyamezaemon, Check out my post in conversion kit ... "Cheaper Post". Rock

If you are in a bind and have some old parts, you can make your own seat post for use with your conversion kit. I used an "old" straight post (28mm OD x 21mm ID), cut the head off and screwed in a 4" long 1/2" nom. pipe nipple (USA NP) then drilled and pinned it secure. Rock

Wheel flop & other things Thanks for the photo Will. Very clever spring ballance system. I assume the spring set does not overextend (go beyond their range) at full flop. I would be most interested in your ideas for a shock absorber (steering damper). It would be great to have...

Will Rifkin, can you post photos? Will, Your description of your anti-flop system is very intriguing. Can you send photos? If you don't know how, John T says to use the picture icon, go to "upload" and browse for your photo (make sure it isn't too large a file). Thanks , Rock

Thanks to Kim & More Photos Kim, Thanks for the pointers. I'll try the open palms technique. My finished conversion: My "sling" trainer

Thanks to Doug for his help in choosing a frame (90's Fisher Y "Joshua") and thanks to John for the lesson on BB design. Got the Gary Fisher frame from Ebay for 67$US plus shipping. I had the frame sand blasted and black glossy powder coated ($80). Took running gear (Sakae &...

Wanted: Used conversion kit !! I need a kit for an MS ride in 5 months! I'm in Arizona until the end of January 2012 then driving back to Midwest and could pick up on the way (unless you are in deep snow). Thanks, Rock dkfinan@yahoo.com

Doug, Thanks for this tip and Doug, Thanks for this tip and your earlier advice about my Fisher Joshua Y. I'll blast some bare spots and use some zinc-oxide spray on these. I'll rough up the remaining paint and wet sand to feather the bare edges. I'll try enamel w/ poly clear and see...

Hi, I'm new to this impressive Cruzbike forum. Need to go from my weggie to a safer recumbent. I'm a bleeder and don't need to take any more headers. Been looking at comments about the conversion kit and how neat the Cruzbike FWD is to ride...so I eBayed a Fisher Y frame and am getting...