Search results

Looks to me like mainly new color schemes and available assembled with a 1x11 groupset. The large upper cog is typical of the 1x SRAM derailleurs. The derailleur looks like a 1x SRAM with the same hanger as before. From the graphics, it looks like the derailleur is SRAM Apex 1 series, as does...

FWIW, here is a (rather poor) photo of my S30 as presently configured with the curved slider and a Volae seat. As I hope you can see, the slider does open up the cockpit quite a bit. Sorry about the cluttered photo. I need to get some clean ones of this soon. Ray

So I have had that problem with my S30 also. I am 5'7" with short legs and the handlebars end up right in my lap/gut and are very confining. I found two approaches to be satisfactory. One is to use the curved riser; it does not strongly extend your arms more but does open the cockpit while...

I suppose we're entering the "guess what this design entails?" phase of the rollout. All I note is that the photos in the e-mail do not show a Diatech headset and front boom on the top of the headset like the QX100 or Q559. Although some stem spacers appear to be there. Seems to imply a...

I ran into the same problem when I installed new TRP Spyke disc brakes on my Q. Getting the disc aligned was just outside the available range of adjustment for the caliper. I ended up putting a thin washer (roughly a mm thick) between the caliper and the caliper mount to move it over. Worked...

I have the dual-chamber A5-RR1 on my Q559. It work's well, but I can't say it is significantly better than just using the single-chamber A5-RE. Either works fine for me. Either is significantly better than the OEM mechanical version. Ray

I have a Quest 559 V3 and the Compass Rat Trap Pass tires fit both front and rear. Now, it is a pretty tight fit, with only several mm clearance around. The tires measure about 53 mm wide on a 21 mm rim, so do not reach the spec 2.3 in width. While a somewhat tight fit, I've use them on 40...

The 650B (27.5 in) wheels are Mavic CrossOne's, their entry level wheel. The size is ISO 584, and the inner rim width is 21 mm, so a moderately wide rim. The 26" wheels are Mavic CrossRide's. Their size is ISO 559 and the inner width is a similar 21 mm. The two wheel sizes are not...

I've used both 2.3 in wide 26" tires, and 42 mm wide 27.5/650b tires on my Quest 559 V3. The larger 650b tires seem to feel fastest and more controlled. The 2.3 in 26 in tires (Compass Rat Trap Pass) are great for unpaved limestone trails, but seem a little too flexy on pavement unless the...

You know, I should be more careful in my comment on this. Much of the lightness of the front on my Q559 V3 is most likely due to the fact that I also got rid of the SRAM Dual Drive front hub, while it remains on my V2. I would still assert that the pogoing goes away when on a V3 without...

I recently got a short chainstay from Cruzbike for a new S30 build. It has the new chainstay clamps. They are inside the BB cups, but they also just as importantly are split clamps that make it easier to remove without messing with the BB cups at all. Very nice. I figured that was one of the...

So, I have a Q559 V2 (with front suspension) at my in-laws in CA, while I have a Q559 V3 here in WI. The difference in ride is large. The ride is much tighter with no pogoing and the front end feels significantly lighter on the V3. I have also fitted the V3 with 650B wheels and 42 mm tires...

I put a Thorseat Easy on my Quest 559. The description is here: http://cruzbike.com/forum/threads/a-trail-quest-or-q650b.11010/#post-121674 It's a little out of date since I've continued to tweak things, but the seat is the same. I don't see why you couldn't go with the Sport. Another...

On my ver3 Quest 559, I routinely run with 650b (27.5 in) wheels and 42 mm wide tires. Using wide supple tire from Compass. The bike seems a lot smoother and faster than it's original configuration. I also changed the handlebars to drop bars. I assume the QX100 geometry is the same as the...

Yes, the principle applies to the "utility" QX100. It does help climb hills, per my experience with a Quest559 (the QX100 precursor model). The Silvio S30 has the same very stiff front end as the Vendetta so I guess would be a similar climber to the Vendetta, but users more experienced on...

Nice! The clamps even come in colors....

I should have mentioned I used this setup for commuting over the past 4-6 months, and for 30-90 mile day trips. Gear range is sufficient for both uses in our mild hill country in WI.

I put a 1x11 Rival 1 drivetrain on my Quest. Using a Rival 1 long-cage derailleur, pc-1130 chain, and Rival brifters. The cassette is a Sunrace 11-42 11-speed. No problems whatsoever. Very quiet and easy shifting. I've used this with both 26in and 650b wheels.

I am in Madison but did not run across your post until today. Have a modified Q559 (a "Q650b") that I use for commuting and trail rides. I also know of one other recumbent rider in Madison that was planning to buy an S30 frame set. Haven't checked with him to see if he got it built up yet...

I should have responded earlier. Sorry. Yep, I did the LSD ride in Chicago, two years in a row. It's a great event. Ray