Search results

The wheels have hubs made by Chosen in Taiwan. They are some of the smoothest around and used by a lot of manufacturers.

If you have a hardware store close that has decent hardware selection you should be able to source that bolt and washer quickly. We can send one but it wouldn't be able to get out till Monday.

E.P.I.C!!! That picture is awesome!

Slim, I am pretty sure with the stock wheels a 38c will fit. The limiting factor is the crown height. usually for tires bigger than 32c (at least with our stock 700c rims) I recommend changing to a 650b anymore. But we don't have that as an option on the S40...

The new S40 will have the mid Viscoset. In my testing the high was just a bit too much - especially if you do any urban riding like I do where I am contstantly making 90 degree turns. Its awesome at high speed... but for overall the mid seems to be the winning ticket. Robert

If you are looking for a box to send a Cruzbike and don't have the original one we use - a larger box from a bike shop that sells mountain bikes or bikes should work. Robert

Yeahhhh!!!!

To answer the OP question though - the S40 is really the commenter/tourer. Capable of hauling 4 panniers plus a trunk with aplomb. The V20 is the race bike. Yes It can be set up to do some fast touring - but the rear end is very light compared to the S40 rear end. Maybe for some credit cart...

The new S40 underseat rack is a simple bolt-on rack that I think will be the preferred way to carry bags on that bike for sure. I designed it during the early Covid lockdown last spring while at home. Its finally here and it is a WIN!

This is a good question - and really I would say the frame set vs. complete S40 is a question of component avalability for you or the shop you get components from... lots of parts are scarce nowadays so building up from a frame *might* be a challenge depending on the spec you are hoping for...

This run of S40's will fit 32c (the stock tire) with a fender. Much winning.

Indeed it is - all previous S40's can use the Viscoset headset as it is a standard size EC style headtube. The fact that we have pulled off these changes mid-pandemic and been able to weave through the manufacturing process where RAMPANT supply issues of raw material and components are a...

There should be a total of 3 washers in that connection - all on the outsides: two on the sleeve and one on the bolt side. That will allow the clamp to pinch just the right amount to tighten so there should be no movement there. I also recommend a bit of grease on the sleeve.

Friction shifting is the best - hands down.

This depends on the brand and model of the DR mostly. Some long cages can only go to 36 tooth, some to 42 (even if the "stats" don't go that high) and some are designed to go into the 50 tooth range. It isn't just the cage length - the position of the B limit screw and how that can adjust -...

Correct. The external cup version. I recommend the mid tune - that is what is on the Q45... I have a heavy tune one coming to test out but am not sure what that is like yet.

Per Velo Orange: "Stack height is the total height, or thickness, of the headset, not including the parts that fit into the head tube. In other words, it's the vertical distance required to fit the headset. Stack height is important because if it's greater than the available space on the fork...

Yes - It will work on any and all Q45's as they all have a standard headtube. If your CB has a headset with "regular" cups a Viscoset "might" work. If it has integrated bearings (ALL hydroformed older models pre-S40 and also all older Vendettas and Silvios, S30, V20's old and current) it will...

The Viscoset will not work on the older hydroformed models or the current V20 - only the older Q's, current Q45, and the S40 as they have "standard" head tubes that use press-in cups. This is because on some models the headsets are integrated bearings - the bearing races are a part of the head...

Great report! I tested the Viscoset on an S40 and Q45 (and older Quest) for about 14 months before we decided to add it as a stock installation. It is a significant price increase from a manufacturing standpoint given it is a specialty item as opposed to regular headsets of which there are a...