Changing the cassette on a Quest 3.0 (dual driveI

[eocbiker]

I am changing the cassette on a Quest 3.0 (dual driveI

I am usng a SRAM PG950 Bicycle Cassette (9-Speed) 11-32T

http://www.amazon.com/gp/product/B001A3DMBA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1


I am also using a M-Wave Cassette-sprocket-remover

http://www.amazon.com/M-Wave-880081-Cassette-sprocket-remover/dp/B001V535KU/ref=sr_1_29?s=sporting-goods&ie=UTF8&qid=1401202338&sr=1-29&keywords=Lockring+Removal+Tool

When I tighten the lock ring the axle turns.

Should I put a cresent wrench on the axle or use the chain whip on the cassette?

 

[richa]

Chain whip


Chain Whip.
I did did the same conversion.

 

[eocbiker]

changing the cassette on a Quest 3.0 (dual driveI to 11-32

I change the cassette on a Quest 3.0 559 (dual drive) from a 11-28 to a 11-32T

Changing the cassette to a 11-32 made a big different in my hill climbing ability
I now am able to pedal up hills that before I was walking up.
I choose 11-32 because I though 11-34 would be to low
11-32 seem to be the right cassette for my ability and the percent of grade of the hills I like to climb in my area.

 

[Andrew 1973]

If you have no chain whip

If you have no chain whip, you can wrap one of your cogs with a length of chain and use Channel Lock pliers to hold them still whilst using removing the cassette lockring.