easy done: installing SRAM AXS HRD Caliper on V20c fork

[Robert Volk]

The caliper came with a SRAM Flat Mount Caliper Bracket, having160mm rotors, the rear installed fine, but having an issue on the front in that the caliper sits too high off the rotor (see pic). If I flip the bracket around (140mm) then course, it is too far down and wheel wont fit.

Has anyone had experience with installing SRAM HRD caliper on the fork that could provide some guidance?

 

[Mathew Fy]

Try without the bracket. May need longer bolts?

 

[chicorider]

I put TRP Spyres and 160mm rotors on my V20c, and did not need an adaptor.

 

[Robert Volk]

Try without the bracket. May need longer bolts?

I put TRP Spyres and 160mm rotors on my V20c, and did not need an adaptor.

yes, ty, just remove the adapter. so obvious now that you say it. Mo coffee required...