Lief
Guru Schmuru
@Winded Lowrider - weather is perking up a bit around here...maybe I'll get up your way for a ride with you and see your new seat?
Keep it simple. I bolted bottom and used a large zip tie thru seat back and around frame. It's plenty solid with with dense foam rubber between frame and seat back. Looking forward to your test results good luck.
Don't have any pics or know how to post them but very simple. I just bolted the front of the seat (needed a rubber spacer between seat and frame to get everything to line up right). Then drilled two holes in seat at about shoulder level the width of the frame tube about three inches. I used an extra big zip tie and went through the holes and around the frame with a layer of rubber material between seat and frame here also and pulled the zip as tight as I could. I've since screwed seat to the frame for a little more solid connection but zips worked fine.
Yes and some older pics can’t be loaded at all. I do hope this can be fixed. The forum is a treasure trove of helpful tips etc but far far less useful without photos.I wonder if it’s related to the change to “forum.cruzbike.com”. Probably a linking error. Also, previously posted pics can’t be loaded beyond their thumbnails.
@Lucia ?
I think those photos are added as links such as this recent one: "https://teammooseisloose.files.wordpress.com/2019/01/chopper.jpg"Yet I see new photos on other forums up to and including today.