Performance Adjustable Headrest

chicorider

Zen MBB Master
I have one that I am not using. But because I am pretty short, at 5'5", it has been trimmed. The bars that extend into the frame had to be cut to allow me to insert them far enough into the frame. And I trimmed the adjustable upright bars because they sat low enough to straddle my rear tire much closer than I liked--a possible blow-out waiting to happen. Otherwise, it's in good shape and has seen very little use. I would say if you are about 5'9" or shorter, this would suit you fine. Let me know if you are interested, and we'll go from there.

(I also have a pretty-much-new suspension adjustable headrest that I'm not using...)
 

Always-Learnin

Vendetta Love
I have one that I am not using. But because I am pretty short, at 5'5", it has been trimmed. The bars that extend into the frame had to be cut to allow me to insert them far enough into the frame. And I trimmed the adjustable upright bars because they sat low enough to straddle my rear tire much closer than I liked--a possible blow-out waiting to happen. Otherwise, it's in good shape and has seen very little use. I would say if you are about 5'9" or shorter, this would suit you fine. Let me know if you are interested, and we'll go from there.

(I also have a pretty-much-new suspension adjustable headrest that I'm not using...)
"The bars that extend into the frame had to be cut to allow me to insert them far enough into the frame."

Sounds like it 'might be' trimmed too short for me....

I'm 5' 10" and had hoped to use the 'stock headrest' along with the New Carbon Adjustable Seat and Headrest for my light, bottles, etc. However, since I am running the New Carbon Adjustable Seat and Headrest at it's fully extended position for neck and head positioning, 'the stock headrest' bars that extend into the frame no longer make a secure contact with the Perez clamp. Also, the clearance between my head and the stock bar currently doesn't allow room for my helmet so I'm wondering if your trimmed Performance Adjustable Headrest would work.
 

chicorider

Zen MBB Master
"The bars that extend into the frame had to be cut to allow me to insert them far enough into the frame."

Sounds like it 'might be' trimmed too short for me....

I'm 5' 10" and had hoped to use the 'stock headrest' along with the New Carbon Adjustable Seat and Headrest for my light, bottles, etc. However, since I am running the New Carbon Adjustable Seat and Headrest at it's fully extended position for neck and head positioning, 'the stock headrest' bars that extend into the frame no longer make a secure contact with the Perez clamp. Also, the clearance between my head and the stock bar currently doesn't allow room for my helmet so I'm wondering if your trimmed Performance Adjustable Headrest would work.
Ah. Probably not. Enjoy that new seat!
 
Top