super slim
Zen MBB Master
I think the $325 would be an over investment in the S1!
I don't think it would improve the handling as the S1 power triangle is stiff.
Cut the steerer tube, so only 1 off 5 mm high spacer, is required to give a 2 mm gap from top cap to the headstem, so a preload can be achieved with the headstem bolt.
The handlebars look like they have a large drop distance
There are many 25.4 mm clamp handlebars on Ebay.
https://www.ebay.com/b/25-4-mm-Bicycle-Drop-Bars/177817/bn_1984342
What is the drop on the S1 bars?
Do any other Cruzbikers have a 25 mm clamp dropbar with less drop, that they want to sell or exchange with CharleJake?
Ratz did a BIG summary of handle bar dimensions on I think this forum, but many of the photos cannot be accessed!
https://forum.cruzbike.com/threads/bullhorn-and-dropbar-options.7014/
Origin 8 Gary II has a 93 mm drop compared to 127 mm for my WTB Dirt Drops on my S1.
I don't think it would improve the handling as the S1 power triangle is stiff.
Cut the steerer tube, so only 1 off 5 mm high spacer, is required to give a 2 mm gap from top cap to the headstem, so a preload can be achieved with the headstem bolt.
The handlebars look like they have a large drop distance
There are many 25.4 mm clamp handlebars on Ebay.
https://www.ebay.com/b/25-4-mm-Bicycle-Drop-Bars/177817/bn_1984342
What is the drop on the S1 bars?
Do any other Cruzbikers have a 25 mm clamp dropbar with less drop, that they want to sell or exchange with CharleJake?
Ratz did a BIG summary of handle bar dimensions on I think this forum, but many of the photos cannot be accessed!
https://forum.cruzbike.com/threads/bullhorn-and-dropbar-options.7014/
Origin 8 Gary II has a 93 mm drop compared to 127 mm for my WTB Dirt Drops on my S1.