ratz
Wielder of the Rubber Mallet
Well this weekend was suppose to be a 100 miler on the trainer. But thanks to a failure on our main Storage Area Network (SAN); I got to tend to status bars all weekend. So what's a bike guy to do while waiting on RAID rebuilds and consistency checks... Why, open up the garage, bike shop, of course.
My big remaining project was to get the "don't hit me I have to pay for 5 kids to go to college" light on to the Vendetta.
I had to do some modification to the brackets that came with my Design Shine lights but the final result is pretty good. First i had to bend the front bracket to a 45. This was after trying about 20 combinations and confirming with Stephen that it was ok to bend it.
Then I mounted the light in my preferred location.
Below the bottom bracket. This keeps the majority of the light out in front and not bouncing back in my face.
Next up I had to find a good way to mount it behind my custom waterbottle setup.
To do that I had to modify the rear braket by reversing the quick release connector.
Then I used a Dinoette ($9) rear light bracket that I use to use for my Silvio from light. I attached that to the water bottle mounting arms using Qty 3 Garmin mounting rubber bands.
And There we have it; see me coming day or night (assuming you are not looking at your cell phone)
And finally a video of the lights in action in the garage
https://www.dropbox.com/s/u7nlbi4apoihi6s/DesignShine1.mp4?dl=0
And one of it on the street. (I know, no helmet, it was about to rain and I rushed. Anyone that complains in writing will be compelled to immediately purchase these lights).... Lief you can simply lament the destruction of your budget.
https://www.dropbox.com/s/fmo0gg4jte4c1hj/DesignShine2.mp4?dl=0
My big remaining project was to get the "don't hit me I have to pay for 5 kids to go to college" light on to the Vendetta.
I had to do some modification to the brackets that came with my Design Shine lights but the final result is pretty good. First i had to bend the front bracket to a 45. This was after trying about 20 combinations and confirming with Stephen that it was ok to bend it.
Then I mounted the light in my preferred location.
Below the bottom bracket. This keeps the majority of the light out in front and not bouncing back in my face.
Next up I had to find a good way to mount it behind my custom waterbottle setup.
To do that I had to modify the rear braket by reversing the quick release connector.
Then I used a Dinoette ($9) rear light bracket that I use to use for my Silvio from light. I attached that to the water bottle mounting arms using Qty 3 Garmin mounting rubber bands.
And There we have it; see me coming day or night (assuming you are not looking at your cell phone)
And finally a video of the lights in action in the garage
https://www.dropbox.com/s/u7nlbi4apoihi6s/DesignShine1.mp4?dl=0
And one of it on the street. (I know, no helmet, it was about to rain and I rushed. Anyone that complains in writing will be compelled to immediately purchase these lights).... Lief you can simply lament the destruction of your budget.
https://www.dropbox.com/s/fmo0gg4jte4c1hj/DesignShine2.mp4?dl=0
Last edited: