SteerStopper on a Silvio V3.0

super slim

Zen MBB Master
For me the rubber band or coil spring, does not strike a cord with me, as I need to turn the front end 170 degrees to fit the Silvio in the back of a i30 Hatchback.

I have gone the SteerStopper direction, so as free as bird when riding, and locked rigid when parked, or pushing around!
https://steerstopper.com/purchase-online/

I bought the delrin stopper with the braze on Receiver ($79), as I have installed a M6 AL Rivet nut, in a 9 mm hole, on the top of the 100*46*1.8 7005 Frame.

The Quality of the machining and fit of the pin is unbelievably good!
With a Fastback 1L Frame pack on the Handle Bar Slider Tube the SteerStopper cannot easily be seen!SteerStopper UP - Riding - with Fastback food bag.jpg

And is visible when locked down!
I need to paint the black receiver white!

Steerstopper DOWN for pushing bike .jpg

Here are some other photos of the rivet nut etc.
Kingchrome_K4700 Rivet nut gun.jpg
Rivet Nut with exposed thread.jpg
SteerStopper .jpg
Steerstopper frame clip .jpg
 

Attachments

  • Rivet gun on frame .jpg
    Rivet gun on frame .jpg
    72.4 KB · Views: 27
Last edited:

paco1961

Zen MBB Master
I knew it was possible! I contacted the company and they said they had tried it on a CB without success. May give it a try myself
 
Top