WhiteSilvio
Well-Known Member
Revisiting Handlebars - Alternative Mounting
Hi TallyHo,
Here is a link to a discussion that took place back in 2012 on Handlebars.
http://cruzbike.com/handlebars
Looking and reading about what I assume you are trying to achieve, I offer an alternative to mounting the handlebars.
It may not fulfill your needs but it may trigger other alternative ideas for you.
If you scroll down to the #3 post you will see a picture of the original setup I used on my Silvio 1.0.
The setup I currently use is basically the same except that I now have a 100mm Chainstay extension and I have dispensed with the original handlebar mount on the end of the telescopic extension. (I bought a spare tube in case I want to go back or sell the bike on in the future and cut the end off and tidied up the end of the tube)
At the moment I would like to have the bar a little further towards me for just a tad more knee clearance; every now and again I just manage to brush the top of my thigh against the bar. Additionally I would like my arms a little straighter.
To achieve this I would need to find some road bars with a much longer reach than the ones that I currently have.
This setup allows you to find a STEM that can be angled back or forwards and have different lengths (normally reach on a DF bike).
So I just thought I'd draw your attention to this thread. In the past there has been discussion on various aspects of handlebars and fitting bodies to these MBB devices.
Ta for now,
John.
P.S. This is a picture closer to the current bike setup.
Hi TallyHo,
Here is a link to a discussion that took place back in 2012 on Handlebars.
http://cruzbike.com/handlebars
Looking and reading about what I assume you are trying to achieve, I offer an alternative to mounting the handlebars.
It may not fulfill your needs but it may trigger other alternative ideas for you.
If you scroll down to the #3 post you will see a picture of the original setup I used on my Silvio 1.0.
The setup I currently use is basically the same except that I now have a 100mm Chainstay extension and I have dispensed with the original handlebar mount on the end of the telescopic extension. (I bought a spare tube in case I want to go back or sell the bike on in the future and cut the end off and tidied up the end of the tube)
At the moment I would like to have the bar a little further towards me for just a tad more knee clearance; every now and again I just manage to brush the top of my thigh against the bar. Additionally I would like my arms a little straighter.
To achieve this I would need to find some road bars with a much longer reach than the ones that I currently have.
This setup allows you to find a STEM that can be angled back or forwards and have different lengths (normally reach on a DF bike).
So I just thought I'd draw your attention to this thread. In the past there has been discussion on various aspects of handlebars and fitting bodies to these MBB devices.
Ta for now,
John.
P.S. This is a picture closer to the current bike setup.