V20 with disc brakes

[Freyot]

Hello,
I purchased a second hand Vendetta V20, it's probably from 2015.
I'd like to put my nice carbon wheels on it, frame having dropouts for disc calipers (IS standart)
However, as you can see on photos below, the centerlock screw touch the frame avec the disc is really really close to the frame, almost touching also.
Is there a solution or something I missed ? The axle of the wheel is well 100mm.
Disc is 160mm.

Thanks for help
Fred

 

[Mathew Fy]

People have filed off just enough to prevent rubbing. But since you report “almost touching” I’d leave well enough alone.

 

[vmi1056]

Hi Fred,

Have you considered a slimmer center lock screw? That might solve your problem since the current one is almost touching, this one pictured should do the trick.

 

[Greg S]

In this case “a miss is as good as a mile”. Almost touching isn’t anything worth worrying about. If the wheel is secure in the dropout it’s not going to move laterally.

As noted, if it really bugs you get a new, thinner lock ring.

 

[Paruig]

I have a Vendetta from around 2010 and I had to file the frame weld and can still barely fit a 140mm disc but it works.