LotsaCruzn
Member
Selling my 2025 v20C. Purchased in May '25 as the Complete Gen 2. The bike has 975 miles. Bontrager Aeolus Pro 51R carbon wheelset, 11-42 rear cassette.
This bike is quick and a blast to ride. I bought it for local rides on smooth pavement, and its fantastic for that. This year I've gotten into randonneuring and frequently find myself on roads that aren't in great shape. The combination of seating position plus narrow-ish tires tends to beat me up a bit. So my plan is to sell this bike and build an S40 set up for randonneuring.
This bike is not only fast, but it also can climb. Lowest gear is about 22 gear inches, compared to 34 for the stock setup. The highest gear has about 123 Gear Inches. This setup has all the range you'll need for both hilly and flat routes.
Components:
- Brifter: Microshift Arsis 11
- FD: Microshift Arsis 11
- RD: Shimano R7000-GS with Wolf Tooth roadlink
- Crank: Driveline 165mm 50/34 (with Vendetta branding)
- Cassette: Shimano 11-42
- Wheels and tires: Bontrager Aeolus Pro 51R's with Continental GP5000's. Wheels have ~4k miles, tires have about 700 miles, plenty of tread left. Tires are set up as tubeless with Fillmore valves.
- Chain: Shimano SLX/105 126 link, 85 miles total, waxed
- Selling either without pedals, or I can include the stock Cruzbike ones, or a pair of these I have laying around: amazon.com/dp/B09W16JDV9?lv=shuf&channelId=500&plpRedirect=mhFallback.
Custom add-ons. I'm happy to include these or remove them. I don't think the printed parts are worth anything, so no price change for those. If you don't want the flag and flag mount I will knock off $50.
- Garmin headlight mount
- Garmin bike computer mount
- 3D printed tail box with Garmin radar mount
- Also have a custom mount for a Garmin radar that I used before building the tail box. I could reinstall that if desired - its in the second set of pictures below.
- T-Cycle flag. I made my own tail box because I couldn't see a great way to mount a flag with the Cruzbike race cage
Other stuff:
- 2x Zefal Spy mirrors
- 3x Cruzbike water bottle holders - 2 under seat, 1 on boom
- Cruzbike Moose Pack frame bag
The only blemish is a tiny bit of scuffing under the right side of the seat, which I know is there but honestly cannot see in the pictures. This was from me taking a turn too quickly, resulting in the bike sliding out from under me. At the time I was using the stock Cruzbike pedals, and it seemed like the pedal took all of the scuffing. No other part of the bike appeared to have contacted the ground.
This bike is basically new, ready to ride, with nice carbon wheels and a drive train that lets this bike tackle both flat and hilly terrain, all for $4500. For reference, a new v20C gen 2 frameset is $100 more at $4600.
Local pickup desired, or I could drive ~250 miles away to meet. Can accept PayPal or Venmo. I can grab more pictures on request.
This bike is quick and a blast to ride. I bought it for local rides on smooth pavement, and its fantastic for that. This year I've gotten into randonneuring and frequently find myself on roads that aren't in great shape. The combination of seating position plus narrow-ish tires tends to beat me up a bit. So my plan is to sell this bike and build an S40 set up for randonneuring.
This bike is not only fast, but it also can climb. Lowest gear is about 22 gear inches, compared to 34 for the stock setup. The highest gear has about 123 Gear Inches. This setup has all the range you'll need for both hilly and flat routes.
Components:
- Brifter: Microshift Arsis 11
- FD: Microshift Arsis 11
- RD: Shimano R7000-GS with Wolf Tooth roadlink
- Crank: Driveline 165mm 50/34 (with Vendetta branding)
- Cassette: Shimano 11-42
- Wheels and tires: Bontrager Aeolus Pro 51R's with Continental GP5000's. Wheels have ~4k miles, tires have about 700 miles, plenty of tread left. Tires are set up as tubeless with Fillmore valves.
- Chain: Shimano SLX/105 126 link, 85 miles total, waxed
- Selling either without pedals, or I can include the stock Cruzbike ones, or a pair of these I have laying around: amazon.com/dp/B09W16JDV9?lv=shuf&channelId=500&plpRedirect=mhFallback.
Custom add-ons. I'm happy to include these or remove them. I don't think the printed parts are worth anything, so no price change for those. If you don't want the flag and flag mount I will knock off $50.
- Garmin headlight mount
- Garmin bike computer mount
- 3D printed tail box with Garmin radar mount
- Also have a custom mount for a Garmin radar that I used before building the tail box. I could reinstall that if desired - its in the second set of pictures below.
- T-Cycle flag. I made my own tail box because I couldn't see a great way to mount a flag with the Cruzbike race cage
Other stuff:
- 2x Zefal Spy mirrors
- 3x Cruzbike water bottle holders - 2 under seat, 1 on boom
- Cruzbike Moose Pack frame bag
The only blemish is a tiny bit of scuffing under the right side of the seat, which I know is there but honestly cannot see in the pictures. This was from me taking a turn too quickly, resulting in the bike sliding out from under me. At the time I was using the stock Cruzbike pedals, and it seemed like the pedal took all of the scuffing. No other part of the bike appeared to have contacted the ground.
This bike is basically new, ready to ride, with nice carbon wheels and a drive train that lets this bike tackle both flat and hilly terrain, all for $4500. For reference, a new v20C gen 2 frameset is $100 more at $4600.
Local pickup desired, or I could drive ~250 miles away to meet. Can accept PayPal or Venmo. I can grab more pictures on request.
Last edited:
