Vendetta 1.5?

[Terry Ulmer]

What size drivetrain can I put on the Vendetta 1.5? 9,10 or 11 speed? Thanks!

 

[ratz]

9 or 10 without modification.

 

[Terry Ulmer]

Thank Ratz.

 

[Terry Ulmer]

9 or 10 without modification.

Hayes Ratz. What modifications do you have to do to make it a 11 speed?
Just curious. I am pretty sure I'm going with a 10 speed setup. For now.

 

[ratz]

Hayes Ratz. What modifications do you have to do to make it a 11 speed?
Just curious. I am pretty sure I'm going with a 10 speed setup. For now.

That would involve some filing of the inside of the fork for chain clearance; or using a waster on the axle to spread the fork about 2 mm. This is something only the really determined and experience should try. Best to start with 10sp and understand you'd need 2mm more clearance for 11 and go from there after you have learned the bike and frame, each can be a little unique.

 

[Terry Ulmer]

That would involve some filing of the inside of the fork for chain clearance; or using a waster on the axle to spread the fork about 2 mm. This is something only the really determined and experience should try. Best to start with 10sp and understand you'd need 2mm more clearance for 11 and go from there after you have learned the bike and frame, each can be a little unique.

Thanks Ratz. I would not be doing that. Time to look for a 10 speed SRAM Rival or Shimano 105 groupset. SRAM or Shimano?