Latest activity

First proper ride yesterday - we had good weather but the wind was really bad. Decided to go against the wind for ~16km (10 miles)...

I do have a v20c but would you really want to mount all this to stuff to the most beautiful and comfortable bike ever created? And it...

I found some cable pull conversion adapters. I'll try that first.

So I am facing an issue that maybe someone can help with. My T50 is set up with regular old mountain bike disc brake callipers. So these...

On a hill check traffic, turn your bike around and go down hill far enough to begin riding then turn and go uphill.

I am running 32mm Schwalbe Pro Ones on rims with 25mm internal width (pretty wide). I like 'em a lot. There is room to go up to 35mm...

Clever. I will try some of this out the next time I do brake work.

I bedded in the pads for the new front brake. They work impressively well. Installed the rear brake today. I reused the existing...

That is a Shimano Di2 front derailleur, with the wire running behind the derailleur and chain catcher, held to the stalk by a zip-tie...

Ingenious! Kuddos!

Thanks to you and Chicorider for the advice. I bought a tubing cutter from HarborFreight for $8. After checking fit several more times...

I wanted a small bag for my bike, and decided to make my own. I dont need to carry much, just a pump, patches, and emergency tools. I...

I wanted a small bag for my bike, and decided to make my own. I dont need to carry much, just a pump, patches, and emergency tools. I...

Somewhere around 32~35 can fit. Depends. Tire width is about as vague as shoe sizes. Also depends in the rim width. But you might...

I noticed this thread is nearly two years old, but for anyone still checking, the V20c weight balance usually leans toward 48/52. At 180...