Search results

I think your bars should be ok. Im use trigger shifters with no problems plenty of knee clearance.

My T50 has a triple. A microshift FD539F braze on derailler works great.

Looks good except your boom clamp is upside down I did the same thing and you cant get 2 wrenches on the headset nuts. Mine is fixed now.

This is what I did cut 3 in off struts added some high density foam floor mat in front 2/3ds of the seat pan. Now no butt pain with seat angled between 35 and 40 degrees. Harbor freight has the floor mats and angle gauge. The picture is kind of blurry but seat is at 38 degrees . Gauge only...

Back to the seat cutting 3 in off struts will give a 35 degree seat angle.

Cheap Harbor freight angle gauge reads around 35degrees no headrest needed so far.

Yes my arms are straighter but bike still handles great. The struts are quite long here they are bottomed out so I could bring the seat back to 45 degrees or so.

Heres my latest seat mod cut a total of 3 inches off both struts. This is as far back as I want to go no butt pain and high enough for riding in traffic.

Seat is a lot better at 40 degrees I used a wonder gel pad on my Silvio 1.o and that helped a lot.

Heres how I did it for slots drilled a small hole and used a hack saw to open slots no welding required.

I cut 2 inches off the struts and the seat is now around 40 degrees.

Seat recline 50 degrees is too steep for me so made some struts to play around with seat angle. Decided to try 17 1/2in hole to hole on struts stock is 19 1/2 thats 2 inches shorter. I made the struts and recline was pretty good so cut 2 in off the stock ones. I will use the ones I made and cut...

I'm raking my seat back around 35 to 40 degrees but still working on the seat stays.

Just gps i have 2 brackets and use the same. Gps

The garmin edge 200 works great on my t50 and silvio

Used a Shimano friction shifter and Microshift FD_R539F braze on front derailler for the triple.This was very easy to set up.

I want to set my seat between 30 to 45 deg

I used a 118 with a triple

20 mm avid adapter works with 160 rear