Search results

  1. ak-tux

    Gates Carbon Drive + Geared Hub

    Chain Waxing may be a better Solution I must point out however that WD-40 does have some thin lubricant, but I think the general consensus is that it does not last for long. So those who use it have to apply it often. It's indeed a big debate. But my own personal experience is that it...
  2. ak-tux

    Gates Carbon Drive + Geared Hub

    @georgec  It's true that the @georgec It's true that the the factory lubricant that came with the new chain is the best. And this is precisely why WD-40 is not recommended for the chain especially when sprayed directly: It is a solvent and it will degrease the chain and leave a thin...
  3. ak-tux

    Gates Carbon Drive + Geared Hub

    @leakyduck, I read somewhere @leakyduck, I read somewhere that WD-40 is a no-no for bicycle chains here : http://bicycletutor.com/no-wd40-bike-chain/ Some say it's just a myth, may be it is. But personally, when I want a clean, lubricated chain that does not leave dirt on the trousers...
  4. ak-tux

    Mountain gearing setup for my Silvio

    @ Eric Winn Gear chart using @ Eric Winn Gear chart using Gain Ratios for 52 chainring with 11-36 cassette For 700c X 25 / 25-622 tire with 170 mm cranks With Custom Sprocket(s) Cassette 10-speed 11-13-15-17-19-22-25-28-32-36
  5. ak-tux

    Mountain gearing setup for my Silvio

    Yes, you are right John! Come Yes, you are right John! Come to think of it, the jump from the 11t to the 13t sprocket is where the real big jump is alt="enlightened" Using Sheldon's gear ratio calculator also confirm this: Assuming a 52T chainring and a 10-speed...
  6. ak-tux

    Mountain gearing setup for my Silvio

    Spin Doctor Tech Tip – 10 Speed MTB Drivetrain Compatibility Very Nice article on SRAM and Shimano10-speed MTB compatibiliity: http://blog.performancebike.com/2011/01/28/spin-doctor-tech-tip-10-speed-mtb-drivetrain-compatibility/ Let me quote the interesting part: 3. In a...
  7. ak-tux

    Gates Carbon Drive + Geared Hub

    @georgec, Pictures speak! @georgec, Pictures speak! Please show us how it looks now!
  8. ak-tux

    Mountain gearing setup for my Silvio

    @Eric Winn  I saw these @Eric Winn I saw these details for SRAM 11-36 somewhere on the internet: SRAM PG-1030 11-36 10 Speed PowerGlide technology provides super-smooth shifting Aluminum spider, heat treated steel cogs, and a durable nickel chrome finish...
  9. ak-tux

    Mountain gearing setup for my Silvio

    @Eric Winn SRAM 10-speed @Eric Winn SRAM 10-speed mountain bike cassettes have 11-36 combinations. My understanding, (and I'am not a SRAM expert ) is that the beauty of SRAM 10-speed system is that they are compatible as long as you have a matching derailleur pull ratio and chain width/length...
  10. ak-tux

    Mountain gearing setup for my Silvio

    @AndrewBaloga, thank you for @AndrewBaloga, thank you for your post: For 11-32 cassettes you can use SRAM WiFi but for 11-34, 11-36 I was refering to a combination of SRAM Road crankset and a SRAM mountain bike deraillur becuase they have the same cable pull ratios what they refer to in...
  11. ak-tux

    Mountain gearing setup for my Silvio

    SRAM Compact 52/36 chainrings good mix for all round riding I think the best all round compact double setup from SRAM is the 52/36 compact chainring set from SRAM red group. It can be fitted to any SRAM compact 110 BCD crankset. If you combine this with an 11-32 or 11-36 cassette and a mid/long...
  12. ak-tux

    Suitable Frame Choice

    The main concern about The main concern about the the step-through/u-frame is the difficulty to find suitable point on the downtube to clamp the cruzbike seat pan. Then there is a possibility that the space in the U may be too cramped. However that being said if one was willing to make...
  13. ak-tux

    Vendetta v1 to v2 changes?

    Someone posted some detailed Someone posted some detailed build photos on the forum link below: http://cruzbike.com/vendetta-unboxing-and-build Hope this helps.
  14. ak-tux

    Vendetta v1 to v2 changes?

    I am by no means an expert I am by no means an expert but I think the following are the main changes: the front triangle is now available in three sizes: Large, medium and small The seat-pan and backrest is bolted to the frame for reduced packaging size Some refinements to...
  15. ak-tux

    Vendetta as a randoneuring bike

    Fenders? If you look carefully at the front wheel, you will notice that it has a fender too.
  16. ak-tux

    Adding an additional hand crank?

    I agree with you John. I was I agree with you John. I was just adding to the thread for those interested. The recumbent world is full of really strange models of bicycles. I think recumbent users tip the scales at experimentation This hand crank idea is one good example
  17. ak-tux

    Vendetta as a randoneuring bike

    Vendetta for Touring? I saw this in the French recumbent forums and I thought it might answer some of the questions in this thread. Don't know how he attached all those bags though but they look like they strap over the seat. Some neat custom work. alt="Touring V" And a...
  18. ak-tux

    Time To Move On...

    Touring Touring V! alt="Tuoring V!" http://velorizontal.bbfr.net/t10687p255-cruzbike-vendetta?highlight=Vendetta
  19. ak-tux

    Time To Move On...

    Touring, it seems can also be Touring, it seems can also be done on a Vendetta when appropriately setup. The french really love the V! Look at this video: http://www.youtube.com/watch?v=9IvB82KFaRc&feature=relmfu
  20. ak-tux

    Adding an additional hand crank?

    Nice MBB with a hand crank in Nice MBB with a hand crank in the French Recumbent Forums: alt="FWD MBB with a Hand crank. " More info in French here : http://velorizontal.bbfr.net/t15532p15-semaine-france-hpv-allegre-14-au-22-juillet-2012
Top