Search results

My official result was My official result was 7:26:24 and they gave me a nice certificate with my name and time on it. My moving ride time was closer to 6:45 but I felt the need to take advantage of the two manned rest stops and two impromptu stops. I did spend a little bit of extra time at the...

Yes but still in prototype Yes but still in prototype stage to get the process fully refined. -Eric

I'd like to try the 22 inch I'd like to try the 22 inch wheels on this one really sharp switchback to a path under Interstate 96 which connects between two different parks and sets of bike paths. I make it OK with the 26 inch wheels but I have to be pretty careful of other traffic because I...

Brian, The Quest 2.0 with 26 Brian, The Quest 2.0 with 26 inch 100 psi wheels works well for long distances. I just did my first century on one at Bike Sebring, Sat Feb 16. My longest ride before this was probably 48 miles. Here are my century ride details...

I haven't heard an official I haven't heard an official count but some folks were saying there are around 160 or 170 or so. I also rode next to a guy in a blue velomible until he pulled away from me. I saw about 4 trikes, a lot of Bachettas, lot of uprights and several brands of...

Here you Here you go: http://cyclemeter.com/a410b492c9780ff7/Cycle-20130216-0634?r=x http://ridewithgps.com/trips/1137800 It was also a little hillier than I was expecting for Florida. All pretty mild stuff but more than I was expecting. -Eric

Finished the Century, not Finished the Century, not sure of my time yet. Straight into 20+ mph winds on the closing leg which felt really, really long. Especially since my wheel configuration for my speed and distance sensor is wrong AND I forgot to start Cyclemeter until a good way into...

Whoops, I should have looked Whoops, I should have looked at his site more closely. He has changed to this: http://roguelsr.wordpress.com/ -Eric

I've been toying with the I've been toying with the idea of building a carbon fiber over foam frame along with some other bike bits along with the conversion kit but it is hard to find the time. I have a set of Robert Q. Riley's Groundhugger plans. Dave has actually built one but I...

Thanks guys!   -Eric   Thanks guys! -Eric

Quest is packed for the trip Quest is packed for the trip to Sebring. Pretty convenient, pop the rear wheel QR and wheel, shock QR, seat post, and two seat thumbnails then practice a little origami with some bits of padding material and presto:

I spent 3 months deliberately I spent 3 months deliberately practicing remaining in the saddle on my Diamondback Ascent when climbing hills to prepare for riding a recumbent. This seemed to help me when I switched. -Eric

Catching up with Dan on the Catching up with Dan on the ultracycling indoor challenge. Dan is number 19 and at the moment I am number 21 At least until he uploads more rides... grin... http://ultracycling.com/sections/standings/indoor_challenge.php -Eric

BBB on Vendetta is almost all headrest and no seat

You might be able to snug it You might be able to snug it up a bit more by using the wide suspension strap that came with it. You can set the strap over or under the seat cushion. If you set it under, it might block a little bit of the velcro cushion strips but probably not enough to make...

Now this is magical and amazing

Maria's RAAM bike I'd like to see what you are doing for Maria's RAAM Vendetta too. Some of those drawings in that other Facebook picture look pretty interesting. I will comment that I've found rear suspensions combined with a low seat carrying something like a Bachetta Brain Box is a...

Is the new V gravity defying Is the new V gravity defying like Jim's Quest in the threads above?

I should also say that my I should also say that my rollers are 80mm in diameter which provide some resistance and no flywheel to coast - basically like constantly pedalling on a flat road into a headwind. And based on the way the bike feels on the rollers vs the actual road a fairly decent...

Thanks all, I appreciate the Thanks all, I appreciate the input. @Dan I found a local Kinesys retailer near me: http://kinesys.com/find-a-retailer.php?qsearch=MI%20USA&map= so I'll pick up a bottle and give it a try - thanks! As Dan mentioned, winter training for Michigan, like...