Stephen Lavinio
Member
I own an older S-40 with a straight handle bar slider tube that has fittings to mount a bottle cage on the underside of the tube. My issue is the placement of the 2 existing mounting fittings are not in the optimal location for my configuration and better positioned farther away from the handle bars on the topside of the tube. I currently use plastic electrical wire ties to secure the cage lower on the topside of the slider tube. It works well but I would like to permanently secure it with similar fittings on the stock slider tube but on the topside of the tube.
2 Qs 1) can my existing straight slider tube be rotated so the fittings face upwards and would be on top of the bar, this way I could use one of the existing fittings.
2) is there a DIY way to add additional fitting(s) where I need them to be for optimal positioning for my bottle cage.
Any suggestions would be greatly appreciated.
SJL
2 Qs 1) can my existing straight slider tube be rotated so the fittings face upwards and would be on top of the bar, this way I could use one of the existing fittings.
2) is there a DIY way to add additional fitting(s) where I need them to be for optimal positioning for my bottle cage.
Any suggestions would be greatly appreciated.
SJL
