Search results

I think most of us wear that t-shirt :)

To date Cruzbike hasn't shared their manufacturing costs. Here are some things we do know before the speculation gets off course 1) The V20 has always been the lowest volume selling bike and that's the reason for the price. It's been refined each interaction and that still takes engineering. 2)...

What brand and make of FD Do you have is it a SRAMM or is it a Shimano When you bolt the FD onto the stock there is a rounded section that allows you to pivoted left and right and up-and-down the brand will tell us which set of instructions to give you in order to fix it without going mad

That is the bolted orientation of the entire cage then. Is this a yaw derailleur or standard?

1 unit has been claimed one remains.

Pedals. To get myself into smooth circles and level out the power so it does not break from the road. Going up hills when I get into huff and puff mode then anything to avoid bursts of torque is good

I wrapped gorilla tape around the bottle. One or two wraps. Problem solved.

It works in 11T then it is a limit screw. The FD should over-shift and come back. To fix that adjust the outer limit screw a quarter turn until it shifts correctly.

I missed that of first read. The MD takes about 500-600 miles to break in; then that resistance goes away. Had one on my Catrike and at 700 the resistance was gone. Unfortunately the under gearing still was a challenge. Sure was fun with the 65T ring going down hill though.

Common with the MTN-Drive because it's too easy to gear to low; which is possible and is slower; due to pogoing in the dead-spot.

Yes these would work with 4F and Zwift, most of 4F was tested on these kickr's. For the video part you needs a Windows or Mac Laptop or an iPad; and from there the ability to project to a TV. We use an iPad, an Ancient AppleTV and TV, and we just Airplay the ipad to the TV; and discord on the...

As far as I know S40 is 135mm standard MTB, the Skewer is 145m Might have to help you find a skewer (I have some long ones) but yep it will work.

yep

The first rule of grandma visit is you don't talk about hotels when the nearest one that's not a rat trap is 30 minutes away.

Or hang with them and buy them beer and pizza; lots of beer and pizza

Actually that's cool the other climbing route was cool but it could get boring. They kept me at level 15 (account was inactive) so now I can go look at it tomorrow.

Chung has always said to test on days with stable winds <= 2mph...... Pretty sure that happens here about once every 10 years or so.

I would have thought it should be the same, maybe not. My point of reference is the RAMM bikes and we didn't have that problem on them all the ETAP stuff is YAW too; those were 50 QLX and the reach was good even on the middle diameters....; but granted they aren't Force 22. I do have a Force in...

Yep I can confirm that one; the math requires that all decreasing is speed come from Cdr and Cda; if you hit the brakes at all in a test segment the data is invalid the math just falls apart. Chung suggests placing a MAT on the group and hitting LAP each time you cross it. If you have a course...

I still think of that as "down" not forward :) Now I under understand. it looks like you are getting bit by the length of your boom; and the way the stalk rotated. There's a shim from Rotor; I'll look the part number up. You put it on the derraillur and will let you shift it that last little...