Search results

Sorry I went off to find a picture last night and got distracted by Portland retreat prep See Hardy's blog for photos..https://teammooseisloose.wordpress.com I suspect the midge-on-one bar would work for you like it does for me; I can ride them traditional or drop them low like Hardy for long...

Sorry to say that is not possible, or more proper really strongly not recommended. The shock is emedded into the fork. If you replace the fort with a shock less one the geometry of the bike would change due to the shorter fork, and the handling would be compromised. The new S30 has a new head...

This should be good until October Tonight the roll of the mallet portrayed by the understudy

Couple of options: 1) cut the fork stem down 2) Curve slider 3) rotate the bars forward like Hardy rides them. Combine them to get a combination that works; you might have to shorten the total boom length for it to work well.

Ridden with it most of the summer; the daytime flash mode is really good. Nigth time the the remote is the bomb; really like it. I'm getting about 8 hours runtime on flash mode with the 5200mAH battery; the bright level chews through it a lot faster; but the dim level last forever. The...

SRAM Brakes pull cable at 3:1 Old Shimano Brakes pull cable at 3:1 New Shimano Brakes pull cable at 4:1 J-Tek levers in most cases pull 3:1 You can mix them and it works but the modulation can get off with some combination being mushy and some being too firm.

How do you think we closed the container of sealant

Yep double and the 1.0 gradient graphics. Those are great I have just started my 3rd rebhab of one of those this weekend.

Had to help a buddy with his tubless today. 1) Apply Schwable mounting fluid to rim tape. just to make it slippery. bottle lasts for about 20 tire mounts 2) Install 700c x 25 pro one; no tools here as well. 3) Give buddy crap for not lining up the logo with the value stem last time 4) Make sure...

On a 50/34T you will get rub on the inside of the 50 when you run little x little if you are on a medium and under 6ft tall in your setup.. That's normal. If you arent getting rub in other sprockets the likely causes are: 1) You have SRAM Cassette 11sp on 11spd hub; or 10sp on 10spd hub; and...

Ha you just describe the vehicle profile of my 50+ cousins, hybrid for grocers; small truck for working the farms. And that describes the Renaissance Fair that is permanently located down the street. Daily inseason in their parking lot the Hondas drive like Off Road Baha drivers; and the SUV...

Nice work. Seems like the estimate of H could be fixed as the height of the wheels, and pick an average Crr for know reference point tires like a Conti II (I like that better than zero), the Cda for the V20, S30 are pretty well known enough to use constants, and suddenly that's a much simpler...

Fail on my part both units sold. forgot to update thread

I did; and then before I transferred them to the computer; I replaced that phone and lost them. The unit since went back to the guy that I borrowed it from

I can hear the debates raging on some forums now over the lost mechanical efficiency at the secondary crank sprocket. Not that anyone whose never tried one would engage in such practices.

That's my problem up hill at that speed 3-4mph I use an in appropriate amount of road on anything but a trike.... including a DF. Walking is 3mph any how.

I just recently got some chain at a good price; the vendor sent them in custom baggies; so I asked if he could sell by the foot and explained the market. He was very interested in the idea and was checking with his suppliers to see if he can do bunk. If he can he'll make a proposal to see if...

That's the boundary of subjective. but the water looks warm..... Gearing always has overlap; with obviously the delta between the front ring controlling total range and the size of the over lap. The Triple was invented in the beginnings of the MTB era when all road bikes of the 130BCD; which...

One good use of the garmin is to find all the bad cables so you can throw them away

Old cable may a shorted wire. Or a burned out resistor. Life in tech support leads to odd knowledge. I learned about this supporting a customers car gps. Tried to say the computer we sold him was defective because his gps would not charge. It is not what you know it is what you have done wrong...