Search results

Indeed it is - it is a standard EC headset. The "medium" is what I prefer and what is stock on the new Q45. Note it is a top only - so you don't actually replace the lower cup/bearing/crown race. https://canecreek.com/product/viscoset/

Ray, We hope to have a ton of the short ones on hand at the warehouse within a week or two max. Robert

Wow this looks fantastic. As for the seat mod that might be the cleanest I have seen and it looks plush!

You have now been indoctrinated - there is no going back And as you dial it in you will only get faster!

Nice video! The main thing I tell people to do is to relax but also keep awareness at all times. Your legs do a lot of the work including steering so I always advise people to not let them get out of control. Remember the rider is controlling the bike not the other way around. My main advise...

Most excellent!

Which begs the questions - • Is the chain you’d recommend the SRAM PC1130/70, NX Eagle)? A generic 11 speed? Whatever one can get? • What are the brake pads to use? Size (best) or model #? (Tektro seems to have 2 models of brake in the same line, and which ones did you use as the pads are...

AWESOME! Might I ask what source you used for that motor? I am not up on what is out there for converting a through axle setup for an E-hub. Robert

Thanks all! The kind words are much appreciated. Also if it is taking a bit longer to get back to inquiries and issues - know that over 70 bikes went out to people in less than a week, and we are getting more inquiries than ever before - all around many supply chain issues due to covid. Luckily...

Indeed the new bars are far far better than the older ones on the Q45 (which were off the shelf bars) These new ones are custom made for us. They will make for a great transformation of the older Q45. Did you have to do any re-cabling of your machine? Note the grip section of the new bar is...

Hey all, Let me adjust the seat angle issue and let you all know what we are going to do: The last few production seat tubes had a top section of roughly 75mm and a bend of 39 degrees. Near universal feedback on the Q45 for the last 2 years was this: people wanted a more upright seat and many...

Hey all - indeed the angle for the seat tube in this run was increased - perhaps a bit too much - but the U shaped piece can be removed to get more recline. I will be working on sourcing a set of spacers to include/send out that will fill that gap when the U shaped tube is removed to get more...

Nice!! Also I want to add a note for all that I need to add to the video - for the brake levers - they are an adjustable pull lever. To work better with the disc calipers you need to dial the small adjusters in clockwise as far as you can - then do the brake adjust. That will help a lot with...

I cant wait to see the pics of all these new Q45's out on the road - once the winter snowpocalypse if over of course. Ha. This is our first foray into through axle - so lots of new for Cruzbike and two wheeled recumbents in general! :-)

Most excellent!!!!

Michelin Pro Endurance.

My basement is pretty much a dank hole - dank and low ceiling hole. Having a PJ and Zwift setup - on an 85" screen in front of me - is like riding off into the virtual world. Its awesome. And I need to get back to it! (Been too bust to even ride the last few weeks) :-(

Trainers where the wheel stays on the bike are not compatible with our front ends. Possibly some could be rigged up to work, but I haven't seen one. Direct drives are the only ones that work near universally.

Ill correct my post - the Tektro long reach ones can work - be aware that braking may or may not be sufficient with those. I tried those and found them woefully inadequate for the steep hills where I live. Also the width of them may or may not be an issue with the big wide caliper at the fork...

Regular caliper brakes will not work on the S40 frame.