Search results

As I remember, by the time the S30 was released, we had gone to 132.5 mm front fork dropout spacing, so that the fork would accept either 130 or 135mm hubs... so a 130mm hub should fit fine.

I think I have one of the original stems. I'm not at home, but will look when I get back (later this week.) Do you still have the fork from your stratus? If it's a 1 1/8 steerer, I'll trade you.

I recently put HY/RD calipers on my SV2.0. I am using Ultegra brifters and they don't really play well with non-Ultegra brake calipers, and certainly weren't happy with the Avid Road BB5 disc calipers I was using. The HY/RD cable-actuated hydraulics are a revelation. Solid response, but easily...

I can provide illustrated instructions for the leaf spring update if they are needed... PM me with an e-mail address...

I've built a lot of Frankenbikes. If you could post a photo, it would help. (I realize that's not too easy on this board...)

I remember taking those photos... good times!

Hi, On some of the earlier bikes, and on the V20, for example, going to 26" from 700C wouldn't buy you anything, because the fork narrowed about half-way up for aerodynamic purposes. If you look at the S40 product page, you can see that the S40 fork is straight-legged, not narrowed. So you...

Clever design - nice fabrication job! Good onya for making it a reality.

I would consider the headset bearing adjuster (below the problem solvers clamp in your photo) to be upside down, but as a practical matter it probably doesn't matter. Loosen the small allen head screw in the adjuster, hold the top half of the adjuster stationary, and rotate the bottom half...

Did not mention - I used a SRAM PG1150 chain, 120 links. Works really well with the huge cassette and the M8000 derailleur.

This is my T50 Beach Bike. It's a Kickstarter framekit with fat tires for navigating sandwash and stuff at Va. Beach. Specs: 1x11 drivetrain 11-50T Sunrace 11 speed cassette 42T Cruzbike e-ring Origin8 170mm 110mm BCD crankset, square taper 116mm Shimano BB (chainline perfect 47.5 mm at the...

Very nicely done. I like the color additions you made. Gray makes an excellent "canvas" to add bold highlights to. I am almost finished with my T50 beach bike, where I used a 1x11 setup with a 42t Cruzbike e-ring chainring with a Sunrace 11-50 eleven speed cassette. I'll be interested to...

Before buying parts to experiment with, this works very well for me... Sheldon Brown's Bicycle Gear Calculator

Okay, I guess I'm losing it. I'm excited about a kickstand. I bought the T50 kickstand from Cruzbike. It is REALLY nicely made. No worries about this one buckling, that's for sure!

Always gotcha covered, Mark...